Firmware Upgrade; Preparations For Firmware Rewriting; Items Required; Writing Data To Compact Flash - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
5.

Firmware upgrade

5.1

Preparations for firmware rewriting

5.1.1

Items required

• Drive which enables writing/reading of compact flash
• Compact flash (service tool)
5.1.2

Writing data to compact flash

1. Prepare firmware data.
2. Format the compact flash on the PC.
NOTE
• Use the FAT file format for formatting the compact flash.
The machine does not recognize any compact flash that has been formatted in
FAT32 or other format.
3. Copy the firmware data to the compact flash.
NOTE
• When copying the data to the compact flash, directly copy the files contained in
the folder, instead of copying the folder.
• Copy only the data to be rewritten.
• Note that no display is given on the control panel if wrong firmware is copied.
• Be sure to take note of the checksum value of the firmware data.
5.1.3

Checking version

• Before rewriting firmware, check the current ROM version.
See P.143
5. Firmware upgrade
31