Default Settings - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
8.3.3

Default Settings

A. Copy
Functions • To make default settings for the copy mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
Use • To change the Initial mode setting to meet the user's need.
Setting/ <Current Setting>
Procedure • The settings made on the control panel before entering the setting menu screens are
registered as the default settings of copy functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the
default settings of copy functions.
B. Fax/Scan
(1) Default Scan/Fax Settings
Functions • To make default settings for the fax/scan mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
Use • To change the Initial mode setting to meet the user's need.
Setting/ <Current Setting>
Procedure • The settings made on the control panel before entering the setting menu screens are
registered as the default settings of fax/scan functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the
default settings of fax/scan functions.
(2) IP Relay Dest. Selection
Functions
• To set the priority for the relay destiny when several IP relay destinies are registered.
Use
Setting/ • Select the relay destiny which priority should be changed, and change the priority
using ↑ and ↓ keys.
Procedure
8. Utility Mode
119