Disassembly/Assembly Procedure; Separator - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
2.3

Disassembly/Assembly procedure

2.3.1

Separator

[1]
[1]
[1]
A083F2C505DA
[2]
A083F2C501DA
[2]
A083F2C502DA
1. Remove the relay connector [1].
2. Remove two screws [1] and remove
two fixtures [2].
NOTE
• When installing the attachment
plates [2], the attachment plate A
with pieces of metal is required to
be attached to the left.
• Install the attachment plates as
shown in the illustration. Press
them downward and secure them
with one screw each.
3. Remove the separator [1].
NOTE
• When installing the job separator,
align the U-groove on the job sepa-
rator with the shoulder screw [2].
2. Other
5