Konica Minolta bizhub C200 Service Manual page 95

6. Other
[2]
[1]
[1]
[1]
56
A02EF2C075DA
[2]
A02EF2C076DA
A02EF2C077DA
Field Service Ver. 1.0 Jun. 2008
4. Disconnect four flat cables [1] and
four connectors [2] of the PH unit.
5. Unhook the tab [1], and remove the
gear [2] of the PH unit.
NOTE
• This step is not needed when
removing PH unit (Black) that does
not have a gear.
6. Remove the stopper [1] of the PH
unit.
NOTE
• When removing the stopper, use
care so that both ends of the stop-
per will not open but stay parallel as
shown on the left.
Keep using the stopper after once
stretched out may cause uneven
pitch or other image troubles.