Field Service Ver. 1.0 Jun. 2008
6.3
Settings in the User Settings
6.3.1
Display Settings
A. Default Fax Screen
Functions
• To set the screen which is preferentially displayed when in fax mode.
Use
• The default setting is "One-Touch".
Setting/
Procedure
6.4
Settings in the User Management
6.4.1
Line Monitor Sound
Functions
• To set the volume of the line monitor sound that can be heard from the monitor speaker
during fax transmission.
Use
• The default setting is "3".
Setting/
Procedure
6.4.2
Memory RX ON/OFF
Functions
• To allow the machine to produce a print temporarily even in the off mode.
• A print control password is necessary to print data.
Use
1. Touch [Memory RX ON/OFF].
2. If a password has been specified, enter the password for "Memory Lock Password"
Setting/
and touch [OK].
Procedure
3. Touch [Lock OFF].
4. To halt the print cycle, touch [Lock ON] while the print cycle is being run.
5. Touch [Temporarily Print] to resume the print cycle.
"One-Touch"
Search
0 (mute) to 5
Direct Input
Index
6. Utility Mode
15