Konica Minolta bizhub C200 Service Manual page 277

10. Service Mode
Mode
476
State
Bit
5-4 Select destination screen:
Displays screen of destination when docu-
ment is loaded in FAX mode.
3 Specify full-dial sending
By linking with Mode 477 bit 6, you can set so
that data can be sent with only pre-decided
one-touch keys.
2 Set broadcast transmission
Enables/Disables broadcast transmission.
This option is provided to avoid unintended
fax transmission.
Mode
477
State
Bit
6 Set fax registration restriction and destination
display
Fax registration /report output restriction
"Administrator only": Fax registration and
report output buttons move to the Admin.
management menu.
5 Destination display
Destination display "Display one-touch
name": Display registered onetouch names
for destinations specified for onetouch keys,
job list, destination names of result reports,
and activity report (TX). (Do not display the
tel. no./address of the destination.)
1-0 Broadcast transmission setting
confirmation window
Specifies whether to display broadcast trans-
mission setting confirmation window when
the Start key is pressed to initiate fax trans-
mission.
238
Default value
Bit 7654 3210
0000 0000
Setting item
Default value
Bit 7654 3210
0000 0001
Setting item
Field Service Ver. 1.0 Jun. 2008
HEX: 00
Setting value
0 1
00 One-touch 1st screen
01 Not available
10 Not available
11 Not available
Not
Allowed
allowed
Enable Disable
HEX: 01
Setting value
0 1
Allow Adminis-
user trator only
Display Display
Tel. No./ one-touch
Address name
00 Not display
Confirms settings at
01
broadcast transmission
Confirms settings (single
10 destination/all destina-
tions)
11 Not available
Description
Description