Cleaning Of The Image Transfer Entrance Guide; Cleaning Of The Idc/Registration Sensor/Mk,Yc - Konica Minolta bizhub C200 Service Manual

3. Periodical check
3.4.9

Cleaning of the image transfer entrance guide

A. Periodically cleaning parts/cycle
• Image transfer entrance guide: When the transfer belt unit is replaced
B. Procedure
1. Remove the transfer belt unit.
See P.24
[1]
3.4.10

Cleaning of the IDC/registration sensor/MK,YC

A. Periodically cleaning parts/cycle
• IDC/registration sensor/MK,YC: When the transfer belt unit is replaced
B. Procedure
1. Remove the transfer belt unit.
See P.24
[1]
26
(every 120,000 print)
2. Wipe the image transfer entrance
A02EF2C034DA
(every 120,000 print)
2. Wipe the surface of the IDC/registra-
A02EF2C035DA
Field Service Ver. 1.0 Jun. 2008
guide [1] clean of spilled toner and
dirt using a cleaning pad with water
or alcohol.
tion sensor/MK,YC [1] clean of
spilled toner and dirt using a cotton
bud.