10.6 Counter; Procedure; Life - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008

10.6 Counter

• The counter displays the counts of various counters to allow the technical representative
to check or set as necessary.
10.6.1

Procedure

A. Checking the counter
1. Call the Service Mode to the screen.
2. Touch [Counter].
3. Touch [Check], and touch the key of the counter to be checked.
B. Clearing the individual counter
1. Call the Service Mode to the screen.
2. Touch [Counter].
3. Touch [Counter Reset], and select the key for the counter to be cleared.
4. Touch [Execute] to clear the counter value.
C. Collectively clearing the counter
1. Call the Service Mode to the screen.
2. Touch [Counter].
3. Select the key for the counter to be cleared, and press the Clear key.
When clearing by mistake, press the interrupt key to recover.
10.6.2

Life

Functions • To check the number of hours or times each of the different maintenance parts has
been used.
• To clear the count of each counter.
Use • When each of the maintenance parts is replaced.
Setting/ • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
Procedure operation.
• It is not possible to clear the count of the counters for the transfer belt unit and imag-
ing unit, which are provided with a new unit detection function.
<1/3>
• Fusing Unit
• Transfer Unit
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• Bypass Tray
<2/3>
• Imaging Unit (C) : Period of time over which the cyan imaging unit has been used.
• Imaging Unit (M) : Period of time over which the magenta imaging unit has been
• Imaging Unit (Y)
• Imaging Unit (K)
• LCT Parts
• ADF Feed
• ADF Reverse
<3/3>
• Printout Opt
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of sheets of paper fed from tray 1
: Number of sheets of paper fed from tray 2
: Number of sheets of paper fed from tray 3
: Number of sheets of paper fed from tray 4
: Number of sheets of paper fed from the bypass
used.
: Period of time over which the yellow imaging unit has been used.
: Period of time over which the black imaging unit has been used.
: Number of sheets of paper fed from the LCT
: Number of sheets of paper fed through the take-up section of the ADF
: Number of sheets of paper fed through the turnover unit of the ADF
: Number of times a sheet of paper is fed through
10. Service Mode
253