Konica Minolta bizhub C200 Service Manual page 248

Field Service Ver. 1.0 Jun. 2008
Mode
374
State
Bit
7 NOTIFY (SUCCESS)
6 NOTIFY (FAILURE)
5 NOTIFY (DELAY)
4 Response to MDN request when receiving
SMTP data
Mode
379
State
Bit
3-2 Specify position for cutting off data when for-
warding received documents
Specify position for cutting off data for the
main scan size from the original size to send-
ing size when forwarding received docu-
ments.
1-0 Specify image editing when forwarding
Specify whether to set the main scan width of
received data to regular width or leave the
stored data width as is when forwarding
received documents.
Default value
Bit 7654 3210
0101 0000
Setting item
Default value
Bit 7654 3210
0000 0000
Setting item
HEX: 50
Setting value
0 1
Used when the mail
Not send Send server processed nor-
mally.
Used when the mail
server detected an error.
Not send Send
Specifies DSN return
transmission.
Used when the mail
server cannot process
Not send Send immediately after receiv-
ing mail file. Specifies
DSN return transmission.
Sets whether to return
Respons No MDN to the e-mail
e response received with MDN
request.
HEX: 00
Setting value
0 1
00 Center
01 Left side
10 Not available
11 Right side
Edit to regular size and
00
forward
01 Forward stored data as is
others Not available
10. Service Mode
Description
Description
209