Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
(4)
Removal of the PH Unit
1. Remove the Front Cover, Left Cover, Rear Cover, Paper Exit Tray, and Rear Inside
Cover.
☞ 1-25
4. Unplug two connectors.
4035D063AA
5. Remove the Toner Hopper Unit.
4035D064AA
6. Remove two screws and the Toner Replenishing
Motor.
4035D065AA
2. Disconnect one flat cable and one connector
from the Master Board.
4035D066AA
1-35
MAINTENANCE