Hopper Drive Unit (C/K, Y/M) - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
6.3.28

Hopper drive unit (C/K, Y/M)

A. Hopper drive unit (C/K)
1. Remove the main drive unit.
See P.60
[2]
[1]
B. Hopper drive unit (Y/M)
1. Remove the main drive unit.
See P.60
[2]
[3]
[1]
A02FF2C062DA
[3]
[2]
A02FF2C063DA
[1] [2]
[2]
A02FF2C064DA
12. Pull the fusing drive unit [1] to the
front and remove it.
2. Disconnect the connector [1].
3. Remove four screws [2], and remove
the hopper drive unit (C/K) [3].
2. Disconnect the connector [1].
3. Remove four screws [2], and remove
the hopper drive unit (Y/M) [3].
6. Other
69