Procedure For Resetting - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008

13. Procedure for resetting

13.1 Trouble resetting
Functions • If the all troubles occur and the status would not be cleared by turning main power
switch OFF and ON again, or opening and closing the front door, clear the status of
the machine.
Use • To be used when the status would not be cleared by turning main power switch OFF
and ON again, or opening and closing the front door in case of a trouble.
Setting/ 1. Call the initial mode to the screen.
Procedure See P.272
2. Touch [Memory Clear] → [Trouble Reset].
3. Touch [OK] to reset troubles.
4. After turning off the main power switch, turn it on again more than 10 seconds after
and check if the machine starts correctly.
13.2 Contents to be cleared by reset function
Contents to be cleared
Jam display
Malfunction display
Erratic operation / display
Setting information of the machine
(fax/network)
Setting information of the machine stored in the
MFBUB (Except for fax/network)
Password information
Destination information
Activity management information
Software switch setting
Counter information
: Will be cleared (initialized)
: Some information will be cleared
⎯
: Will not be cleared
Items for clearing
⎯
⎯ ⎯
Rank A
⎯
Rank B
⎯
Rank C
⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
13. Procedure for resetting
Memory Clear
⎯ ⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯ ⎯ ⎯
⎯ ⎯ ⎯ ⎯
⎯ ⎯ ⎯ ⎯ ⎯
⎯ ⎯ ⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯ ⎯
271