Js Control Board (Jscb); Transport Motor (M1) - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
2.3.7

JS control board (JSCB)

1. Remove the separator.
See P.5
2. Remove the rear left cover.
See P.6
[1]
2.3.8

Transport motor (M1)

1. Remove the separator.
See P.5
2. Remove the rear left cover.
See P.6
[4]
[2]
[1]
A083F2C008DA
[2]
[1]
A083F2C009DA
[3]
[1]
A083F2C010DA
3. Remove all seven connectors [1]
from the JS control board.
4. Remove four screws [1] and remove
the JS control board [2].
3. Disconnect the connector [1] and
remove the wire saddle [2].
4. Remove two screws [3] and remove
the transport motor assy [4].
2. Other
9