Separation Roller - Konica Minolta bizhub C200 Service Manual

2. Other
2.4.2

Separation roller

1. Remove the right rear cover.
See P.5
2. Slide out the tray 2.
3. Open the vertical transport door.
[2]
[1] [2]
OK
20
[1]
4067F2C004DA
[1]
NG
4067F2C005DA
[2]
[1]
4067F2C006DA
Field Service Ver. 1.0 Jun. 2008
4. Remove two claws [1], and remove
the vertical transport door [2].
5. Remove two screws [1], and remove
the jam processing cover [2].
NOTE
• Make sure the position of the mylar
when installing the jam processing
cover.
6. Remove two screws [1] and the sep-
aration roller installation plate assy
[2].