Konica Minolta bizhub C200 Service Manual page 161

8. Utility Mode
B. Paper Settings
(1) Paper Tray
Functions • To set the paper feed tray when not specified by the printer driver during PC printing.
Use • To use when paper feed tray cannot be specified by the printer driver when printing
from Windows DOS, etc.
Setting/
• The default setting is Auto Paper.
Procedure
(2) Paper Size
Functions • To set the paper size when not specified by the printer diver during printing.
Use • To use when the paper size cannot be specified by the printer driver during printing
from Windows DOS, etc.
(3) 2-Sided Print
Functions • To set whether to carry out duplex print during PC printing when not specified by the
printer driver.
Use • To use when 2-sided printing cannot be specified by the printer driver while printing
by Windows DOS, etc.
Setting/ • The default setting is OFF.
Procedure
(4) Bind Position
Functions • To set the binding direction during duplex printing when not specified by the printer
driver during PC printing.
Use • To use when binding direction cannot be specified by the printer driver during printing
by Windows DOS, etc.
Setting/ • The default setting is Top Bind.
Procedure
C. PCL Settings
(1) Font #
Functions • To set the font when not specified by the printer driver during PC printing.
Use • To use when the printer driver cannot specify the font during printing from Windows
DOS, etc.
• To set the arbitrary font number according to the PCL font list.
Setting/
• The default setting is 0.
Procedure
122
ON
"Top Bind"
Field Service Ver. 1.0 Jun. 2008
"OFF"
Left Bind Right Bind