Duplex Unit Transport Motor (M2) - Konica Minolta bizhub C200 Service Manual

2. Other
2.3.5

Duplex unit transport motor (M2)

1. Remove the switchback motor assy.
See the procedures 1 to 3 in P.7 "Switch back motor (M1)".
[2]
[3]
[1]
[2]
8
[1]
[1]
A0ENF2C504DA
[2]
[2]
A0ENF2C505DA
[1]
A0ENF2C506DA
Field Service Ver. 1.0 Jun. 2008
2. Remove two actuators [1].
3. Remove the screw [1] and remove
the ground wire.
4. Remove six screws [2], and remove
duplex unit transport motor assy [3].
5. Remove two screws [1], and remove
the duplex unit transport motor [2].