Console Diagnostic Tests - Stairmaster FreeRunner 5400 ESS Owner's Manual

TROUBLESHOOTING

CONSOLE DIAGNOSTIC TESTS

While the console is in the ATTRACT mode, press [INCREASE], [1], [0], [7],
[ENTER], to enter the DIAGNOSTIC
console should be replaced or
[STOP] while in DIAGNOSTIC mode.
Display Test
Use this test if the console display or text bar exhibits blank spots during
use. This test checks for inoperable
display and the text bar. If any LED will not light, replace the console.
1. Press [0] to start the test.
2. All LEOs in the console display and the text bar will flash on and off as a
block.
3. Press [STOP] to end the test.
Speaker Test
Use this test to make sure the console speaker is fully operational. The
speaker will ascend and then descend through the musical scale.
1. Press [1] to start the test.
2. Press [STOP] to end the test.
Keypad Test
Use this test if are having trouble entering data. Replace the console if you
cannot enter the DIAGNOSTIC mode code due to an inoperable keypad.
1. Press [2] to start the test.
2. The display LEOs will light up in an L-shaped formation, representing the
keypad matrix. Press each key on the exercise program keypad and the
function keypad . The corresponding LED should light up on the console
when each key is pressed.
Page 34
mode. If the console fails any test, the
exchanged. To return to the ATTRACT mode, press
Light Emitting Diodes (LEOs) in the console