Stairmaster FreeRunner 5400 ESS Owner's Manual page 42

4. Carefully turn each of the Poly-V pulleys
smoothness of operation during quarterly
cover.
Lubrication
The following components need periodic lubrication: the drive chain
assemblies, the step chains, the heel link
shafts, sprockets, and the pedal
components.
1. Place a protective mat on the floor whi Ie you lubricate your
rubber floor mat is available from
Inc.
2. Each week lubricate the entire length of the
sprocket with cha in lube
3. Thoroughly clean all of the chains every three months. Use a mild degreaser
and a stiff brush to remove dirt and corrosion from the
lubricate the chains after cleaning them
4. To protect the pedal return springs from
each pedal spring with a cloth dampened with 30W motor oil. Replace the
spring if it is rusty or otherwise
5. Remove the pedals every three months. Clean the pedal bushings and the
pedal shafts. Protect the pedal shafts from corrosion with a thin coat of
mineral oil before reassembling.
TO REDUCE THE POSSIBILITY OF SLIPPING, BE SURE THE PEDAL
AREA IS FREE OF GREASE OR OIl. WIPE ANY EXCESS Oil OFF
THE MACHINE SURFACES.
MAINTENANCE INSTRUCTIONS
counterclockwise,
lubrication. Reinstall the left side
chains, the pedal return springs, pedal
bushings. Remove the covers to access the
StairMaster® Sports/Medical Products,
chains, and around each
(e.g. P J-1 ®).
.
corrosion, wipe the entire length of
damaged.
WARNING
and check for
machine. A
chains. Remember to
Page 29