Brake - Stairmaster FreeRunner 5400 ESS Owner's Manual

Brake Motor
Brake Cam

Brake

Figure 15: Brake Location
Brake
1. Remove the left side cover.
2. Remove the mounting bolt from the brake and lift the brake off the
alternator flywheel.
3.
Install the new brake and reassemble the machine.
4. Use the brake actuator spring nut and/or the lower mounting nut to adjust
the throw on the arm to properly engage/disengage the brake (see Figure
15).
PARTS REMOVAL AND REPLACEMENT
Remove the brake actuator arm from the brake.
"Brake Off"
Switch
Brake Cam
Mounting
Screw
"Brake On"
Switch
Brake
Actuator
Arm
Jam Nut
Lower
Screw
Page 43