Console; Console Handlebar - Stairmaster FreeRunner 5400 ESS Owner's Manual

5. Pull the step chain away from the drive sprocket and install the new
6. Reinstall the spring and verify that the spring is seated in the spring hanger
groove.
Note: Ifyou are having difficulty removing the left spring, remove the
power control board for more accessibility.

CONSOLE

1. Remove the four mounting knobs and lock washers from the back of the
console.
2. Lift up the console and disconnect the upper main cable, the
rate cable, the left and right contact heart rate cables, and the upper brake
cable.

CONSOLE HANDLEBAR

1. Remove the console and the side covers.
2. Disconnect the upper main cable from the lower main cable. Unplug the
upper brake cable from the lower brake cable.
3. Remove the main cable and the Polar heart rate cable from the console
handlebar.
4. Have an assistant support the handlebar. Remove the bolts and washers
from each end of the handlebar. Gently pull the handlebar away from the
machine.
5. Install the new handlebar and connect all cables. Ensure that the
cables are not pinched between the frame and the handlebar, and are not in
the way of moving parts.
6. Reinstall the console and the
PARTS REMOVAL AND REPLACEMENT
covers.
chain.
Polar® heart
Page 53