PARTS REMOVAL AND REPLACEMENT
3.
Have an assistant help you tilt the mach ine forward
handlebar.
4.
Loosen and remove the spring
Remove
the spring
cartridge.
5.
Install the new spring
cartridge,
an assistant help you tilt the machine back into
6.
Tension the
heel
link turnbuck les and adjust the top edge of the heel link
pivot assembly so that it is parallel with the floor (see
7.
Reinstall the
covers.
THE SPRING CARTRIDGE IS UNDER HIGH PRESSURE. DO NOT OPEN THE SPRING
SPROCKETS
Drive Chain Idler Sprockets and Heel Link Idler Sprockets
1.
Remove
all
of the
covers.
2.
Remove
the drive chain assemblies from the
3.
Remove the
drive shaft assembly.
4.
Remove
the heel link
cha
5.
Remove the mounting
blocks.
6.
Remove the idler mounting bolts and insta
Page 64
onto
cartridge
mounting
bolts from
connect
the lower heel link chains and have
place.
DANGER
CARTRIDGE.
drive
chain
ins from the heel link
sprockets.
ll
the new
sprocket(s).
the
console
the
frame
.
Figure
29).
sprockets.