Table of Contents
Advertisement
MAINTENANCE INSTRUCTIONS
INITIAL SERVICE
Upon receiving your machine, use a soft, clean towel to wipe off the dust
that may have accumulated during
assembly. Refer to the "Installation Instructions" section for details.
PREVENTIVE MAINTENANCE
A schedule of the recommended preventive maintenance
4. This schedule assumes moderate to heavy usage in a commercial health club
environment. Always unplug the power prior to working on the machine. Refer to
the
"Parts
Removal and Replacement" section for all disassembly and assembly
instructions.
Cleaning
1.
DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD CLEANER ON
THE
CONSOLE.
Clean the console daily with a water-dampened cloth and
wipe dry after cleaning.
2.
Clean the exterior of the machine daily using soap and water or a diluted
household cleaner such as Fantastic
3.
Thoroughly clean the entire machine, including the interior, at least once a
week.
Inspection
1.
Inspect the exposed frame for any rust, bubbling, or paint chips during the
weekly cleaning. The salt in perspiration can damage any unpainted
surfaces. Repair the damaged area with touch-up paint (PN 22181).
2.
Clean the contact heart rate sensors weekly with a water-dampened cloth
and wipe dry after
cleaning.
3.
Remove the
left
side cover, and
fraying during quarterly
Page 28
shipping.
Your new machine will require minor
®.
inspect
the belts for undue wear and/or
lubrication.
Adjust the belt tension if necessary.
is
shown in Table
Advertisement
Table of Contents
Troubleshooting
