PARTS REMOVAL AND REPLACEMENT
COVERS
TO REDUCE THE RISK OF INJURY, DO NOT OPERATE THE MACHINE WHILE THE
COVERS ARE REMOVED. DO NOT MOVE THE PEDALS WHILE ANYONE'S HANDS
ARE
Base Cover
1.
Remove the side
covers.
2.
Remove
one
inside
mounting rivet from each
3.
Lift the
bottom cover
up to detach it from the frame.
4.
Pu
ll
the cover
out
and away from the frame.
Heel Link Pivot Cover
1.
Remove the two mounting screws from the
old cover.
2.
Install the new
cover
using the two mounting
Safety Panel
1.
Remove
the fasteners from the inside edge
2.
Sl
ide
the panel out from behind the heel link pivot assembly and install the
new panel.
Side Cover
1.
Remove
the top cover.
2.
Loosen
the
wing
nuts holding the top
Page 54
WARNING
INSIDE
THE MACHINE.
side
of
the frame.
cover,
and then remove the
screws.
of
the
safety panel.
of
the
side
cover in
place.