Console Codes - Stairmaster SC916 Owner's Manual

CONSOLe COdeS

There are 4 groups of console codes as follows: Customization (codes starting with
2 or 3), Machine Status (codes starting with 4), Diagnostic (codes starting with 6
or 7), and Configuration (codes starting with 8). Each group of codes is defined
below. To access these console codes and the options within each group, follow the
instructions for each section.
Customizing the SC 916 StairClimber
You can customize several parameters on the SC 916 StairClimber to conform to
your individual requirements, including changing the workout default values and
setting custom parameters such as time limits, changing screen contrast, changing
language, and changing units.
to change the workout default values:
1. Press [Level: UP], [2], [ENTER]. The console will display "DEFAULTS".
2. Press [Level: UP] or [Level: DOWN] to scan through the default choices. Select
the option you want to change by pressing [ENTER]. Then use the [Level: UP]
or [Level: DOWN] keys or the numerical keypad to change the value for the
selected option. Press [ENTER] to accept the choice for that option.
the defaults options are as follows:
Change default weight
Use the numeric keypad or [Level: UP] or [Level: DOWN] keys to change the
desired default weight for your facility. Press [ENTER] to accept the new value.
Change default workout time
Use the numeric keypad or [Level: UP] or [Level: DOWN] keys to change the
desired default workout time between 5 and 99 minutes. Press [ENTER] to
accept the new value.
Change default age
Use the numeric keypad or [Level: UP] or [Level: DOWN] keys to change the
desired default age used to calculate target HR. Valid age range is between 10
and 99. Press [ENTER] to accept the new value.
STM_SC916 _OM_RevA_021208_Print.indd 36
Operation
36
Owner's Manual
2/12/2008 7:57:07 AM