Maintenance Instructions; Helpful Hints; Tool List; Maintenance Records - Stairmaster FreeRunner 5400 ESS Owner's Manual

HELPFUL HINTS

Read all maintenance instructions thoroughly before beginning
some cases, an assistant is required to perform the necessary tasks.
All references to the left or right side, and to the front or back, are made as
if you were on the machine ready to exercise. For example, the console is located
on the front of the machine. Major component names and locations are shown in
Figures 19 and 20. When ordering parts, reference the part number in
parentheses next to the part's description on the figures.

TOOL LIST

The following tools are needed to perform service and maintenance:
• Standard screwdriver • Phillips screwdriver
• Alligator Clips • External snap ring pliers
• Multimeter • Allen wrench set (sizes 5/64 - 1/4")
• Eye protection • Socket set or nut driver set (sizes 1/4 - 3/4")
• Combination wrenches (sizes 7/16 - 3/4")

MAINTENANCE RECORDS

The 5400 ESS console will keep track of the following data on machine
usage:
• The TOTAL number of hours the power supply was turned on.
• The number of hours (HRS) the machine was in use.
• The number of WORKOUTS started.
• The hours of MANUAL use.
• The number of workouts where the console registered a heart rate
(HR) for
greater than 90% of the program.
• The EE PROM diagnostic for service technician use.
To display the data, press [INCREASE], [7], [7], [0], [3], [ENTER] while the
console is in the ATTRACT mode.
sequence listed above. The machine may show a few hours of use when received
due to testing at the manufacturing

MAINTENANCE INSTRUCTIONS

The console will display the data in the
facility.
work. In
Page 27