Adjusting The Boom; Using The Air Fit™ Console - Stairmaster Air Fit Upper Body Owner's Manual

ADJUSTING THE BOOM

The Air Fit boom can move up and down to
accommodate seated and standing use for users of all
sizes. To adjust, pull the paddle underneath the boom
toward the user, move the boom up or down to the
desired position, then push the paddle back into the
locked position, as shown in Fig. 5. Always check to
make sure it is locked securely before use.
USING THE AIR FIT™ CONSOLE
Start Timer and Data Tracking
Pause Timer and Data Tracking
Reset Timer and Data Values
Select Metric or Standard Units
Set to Upper Body Ergometer or
Bike mode
Fig. 5
Push any button to turn on console, timer starts
automatically
Press the Start/Stop button. Press again
to re-start
Press and hold the Start/Stop button
for 5 seconds
Press and hold shift for 5 seconds, active units
settings blink. Press shift button again to switch
units. Press and hold shift button 5 seconds to
set the units. If no button presses occur for 20
seconds when in the units set mode, the
computer will go back to functioning mode
and use last selected units.
The same console can be used for the Air Fit
Upper Body Ergometer and the Air Fit bike. Press
and hold the Start and Shift key for 5 seconds at
the same time to enter engineer mode - choose
code 3701 for the Upper Body Ergometer, choose
3700 for the Bike
17