Polar® Heart Rate Cable; Upper Main Cable - Stairmaster FreeRunner 5400 ESS Owner's Manual

7. Replace each sensor grip,
console.
Polar® Heart Rate Cable
1. Disconnect the Polar heart rate cable from the console, and remove the right
top cover.
Note: When removing the top cover, lift up gently and disengage the
Polar heart cable from the heart rate receiver located in the top cover
2. Pull the cable out through the console
3. Thread the new cable through the console handlebar and connect the cable
to the heart rate receiver.
4. Connect the cable to the console and reinstall the console.

Upper Main Cable

1. Remove the left side cover and the console.
2. Disconnect the upper main cable from the lower main cable
frame .
3. Pull the upper main cable out through the console
4. Thread the new cable through the console handlebar, and connect the upper
and lower main cables.
5. Connect the upper main cable to the
cover.
PARTS REMOVAL AND REPLACEMENT
connect the cable to the console, and reinstall the
(see Figure 11).
handlebar.
Reinstall the top cover.
handlebar.
console. Reinstall the console and the
inside the left
Page 45