Permanently Disable Port Mirroring - Avaya 1230 Administration

Automatic firmware upgrade using BootC
When a firmware upgrade is performed and there is not enough memory to allocate a buffer for new
firmware, the IP Deskphone automatically reboots and BootC is loaded.
BootC downloads the provisioning file (for example, 1220SIP.cfg). Only the [FW] section of this file
is processed. BootC uses the same settings (for example, Provisioning Server URL, protocol) that
are used in normal mode.
BootC performs the firmware upgrade, and the IP Deskphone automatically reboots again.
The IP Deskphone starts up with new firmware in Normal mode.
Note:
Regardless of whether the firmware upgrade was successful or not, the [FW] section does not
offer to update during the IP Deskphone reboot.
Support of HTTPS protocol in BootC
HTTPS is supported for downloading provisioning files (for example, 1220SIP.cfg) and firmware
images from the Provisioning Server. It uses the embedded and customer certificates that are
installed on the IP Deskphone.
Important:
Customer certificates must be installed in Normal mode.
Both mutual authentication and server-only authentication methods are supported.
The TLS connection cipher is set according to the security policy configured on the IP Deskphone
(the security policy must be configured in Normal mode). The default cipher is
TLS_RSA_WITH_AES_256_CBC_SHA.
For more information, see

Permanently disable Port Mirroring

SIP 4.4 introduces the ability to permanently disable Port Mirroring through provisioning. When Port
Mirroring is permanently disabled, it cannot be enabled in the Advanced Diag Tools menu or by
using the special key combination.
In SIP 4.4, when the existing PORT_MIRROR_ENABLE configuration parameter is set to NO, the
Port Mirroring feature is permanently disabled. The Port Mirroring prompt in the Advanced Diag
Tools menu is disabled and cannot be modified. This is the default.
If the PORT_MIRROR_ENABLE configuration parameter is set to YES, the Port Mirroring prompt in
the Advanced Diag Tools menu is enabled and can be modified. If enabled, the Port Mirroring
setting survives a soft reboot of the IP Deskhone, but not a power off. If the IP Deskphone is
powered off, Port Mirroring becomes disabled.
Toggling Port Mirroring on and off by using the key sequence ([MUTE]-[UP]-[DOWN]-[UP]-[DOWN]-
[UP]-[7]) is no longer supported; if Port Mirroring is enabled through provisioning, it can only be
turned on and off through the Port Mirroring option in the Advanced Diag Tools menu.
March 2015
HTTPS support in BootC mode
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
on page 269.
Features
21