Table of Contents
Advertisement
Mass Air Mounting
Note: If your engine is a 1989 or newer, follow this procedure for mounting the mass air meter and air
filter.
1. Flatten the outer edge of the mounting bracket using a hammer or vise. Use the top OEM hole and
mount to the front side of the vertical ¾" frame tubing above and just forward of the passenger foot
box.
2. Drill a second hole through the bracket and into the ¾" frame tubing.
3. Use kit fasteners to secure bracket.
Fuel Vapor Canister
Note: The emissions canister can be mounted to the right side of the engine bay on outside of the ¾"
horizontal tubing just behind the mass air meter.
1. Drill two
/
" holes through the canister bracket OEM holes. Mount w/ two #14 screws.
3
16
2. Attach the vent hose from the gas tank to the canister and the hose leading to the engine.
ATTENTION: Avoid damage to the delicate radiator fins during handling. Make sure the electric fan
shroud does not bend/oval or it will cause the fan blades to hit. Do not lean on the fan shroud
while engine is running as this may bend shroud and cause fan blade to hit fan shroud.
TOOLS:
/
" and ⅜" sockets, ⅛",
5
16
Phillips head screwdriver, rivet gun, Hack Saw, Tape Measure, Marker, Tin snips.
PARTS: Radiator mount components (FFR# 13645). Stainless Radiator hose kit (FFR# 13883), ⅛" and
/
" rivets, Mustang fan shroud with fan, & overflow reservoir.
3
16
1. Attach the
/
" steel strips to the electric fan using the Philips head screws provided.
1
16
2. Remove the radiator reservoir using a
Emissions fuel vapor canister mounted
Radiator, Hoses & Fan Shroud
/
",
/
" drill bits, drill, jack stands (2), razor knife to cut hoses,
9
3
64
16
/
" socket.
5
16
88
www.factoryfive.com
508-291-3443
.
Advertisement
Table of Contents
