Factory Five Racing Mk3 Roadster Assembly Manual page 81

3. Lift the engine using the two factory brackets that are on the 5.0 engine (make sure that the brackets
are turned the correct way). Sometimes people put these lift brackets on backwards since they are
removed when removing the headers and reversing the headers.
4. The engine/transmission assembly should be drained of oil to ease installation and so that the
transmission oil does not leak when at the installation angle. Apply tape over the rear of the
transmission to help reduce drips even if already drained of fluid.
5. Make sure that the engine mounts are installed on the engine correctly.
6. Slowly lower the engine and transmission assembly in the engine bay.
Transmission mount bolted to frame.
Engine/transmission on hoist
81
www.factoryfive.com 508-291-3443