Carpet Installation - Factory Five Racing Mk3 Roadster Assembly Manual

9. Remove the seat and drill through the seat frame holes only with a
through the seat easily.
10. Re-align the seat in the cockpit and fasten the seat using an 8mm socket, ratchet and fasteners
included with the seats. Do not torque the screws to more than 20lb/ft.
12. Remove the seats so the carpet can be installed.
TOOLS: Razor knife, 3M Super 77 Spray Adhesive, marker pen, ruler, silicone, and caulk gun.
PARTS: Mk III Black carpet (FFR# 13936)
1. Install any remainder of the large adhesive self expanding weather-stripping in any large openings
between the aluminum and the body.
2. Position each piece of carpet in the correct location before installing it to do any final trimming if
necessary. The floor carpet will go on last and cover any extra.
3. Wipe and clean the aluminum to ensure good adhesion and eliminate debris accumulated during the
build-up process.
Seat frame screwed to chassis.

Carpet Installation

175
www.factoryfive.com 508-291-3443
/ " drill bit so the screws can pass
9
32