Factory Five Racing Mk3 Roadster Assembly Manual page 176

4. Use the following for the order of installation for all the carpet except the main floor pieces:
Rear cockpit corners
Rear cockpit wall
Transmission top cover
U-joint cover
Passenger side footbox outside/front walls
Driver side footbox outside/front walls
Driver inside/middle/passenger inside walls
Driver side dropped floor
Passenger side dropped floor
5. For easier positioning of the seats later, cut a small hole in the carpet where each seat screw hole is
and around the emergency brake handle.
6. Install the main cockpit floor carpets.
Clean the aluminum cockpit floor before final assembly
176
www.factoryfive.com 508-291-3443
.