Nameplate - Factory Five Racing Mk3 Roadster Assembly Manual

Completed interior. You cannot see any of the aluminum.

Nameplate

Factory Five Racing has included a Nameplate for your kit. This can be engraved at any Trophy or mall
engraver. Below is an example of how the nameplate can be engraved with the serial number from the
Certificate of Origin which also matches the number welded in the end of the 2"x 3" tube behind the
driver seat. The VIN number space is provided so that your state issued VIN number can be engraved if
you so desire. A few places that people have riveted these plates are: front of the 2"x 2" hoop in the
cockpit; on top of the driver footbox; on top of the passenger footbox; on the 2"x 2" "X" on the front
suspension.
180
www.factoryfive.com 508-291-3443