Factory Five Racing Mk3 Roadster Assembly Manual page 264

4. Pull on the "T" connector attached to the emergency brake handle and slide on the cables one at a
time.
5. Pull up on the emergency brake handle, so that the automatic tensioning cog can adjust the free play
in the lines.
• Fuel line Installation
1. Use the included /
5
16
filter to the hard line using the Mustang connector. Route the hose through the triangles in the upper
cage.
2. Slit the old 6" piece of fuel line and wrap it around the new fuel line where it goes through the
triangles. Zip tie the line and slit hose in place so that the hose will not wear on the edge of the steel.
E-brake cables attached to triangles
Emergency brake cable next to mounting bracket.
" flexible line, and fuel injection hose clamps (FFR#10855) to connect the fuel
www.factoryfive.com
264
508-291-3443