5. Remove the brake pedal spring from its mount hole and remove the plate on the front of the pedal box
along with the round spacers.
6. Relocate brake pedal spring to pedal box triangular opening.
Many people choose to cut down the wiring harness to use only the wires and leads that are needed. You
can save about 20 lbs. by doing this. Be sure to follow the schematics and avoid cutting circuits you
need. Some suggested parts to remove are:
1. Speaker wires
2. Radio wiring
Brake pedal spring in mount hole and plate/spacers on pedal box front.
Brake pedal spring in triangular opening.
Wiring Harness
www.factoryfive.com
32
508-291-3443