Factory Five Racing Mk3 Roadster Assembly Manual page 151

.
Radiator nose aluminum mounted
8. Line up the edge of the radiator fins with the edge of the side aluminum.
9. The top angle of the sidepieces will not go all the way down to the top of the quick jack mount.
10. From the wheel well side of the radiator, mark the aluminum along the ¾" tubing that goes down to
the quick jack mounts. This way you can get straight, evenly spaced rivets.
.
Passenger Side aluminum mounted with weather-stripping
11. Remove the sidepieces, mark and drill the rivet holes.
12. Remove the floor aluminum.
13. Apply silicone to the bottom of the radiator where the aluminum will contact.
151
www.factoryfive.com 508-291-3443