Table of Contents
Advertisement
ATTENTION: When you're finished, double check the hose clamps that connect the rubber fuel neck to
tank to cap. Previously the fuel neck hole was cut out of the body using the template. In 1999,
Ford changed the style of the filler neck, a new Stainless steel neck has been provided for this
application.
TOOLS: ⅜" deep well socket, hex key set, Phillips head screw driver, hack saw, drill,
safety goggles.
PARTS: Aston Lemans Cap Components (FFR# 14744), Fuel strap fasteners (FFR# 10896), 99-04 filler
kit (FFR# 14005), Mustang Filler neck.
1. Remove the filler neck from the gas tank.
87-98 Fuel Filler Neck
1. Cut the Mustang steel fuel neck in the mid-section after the 90° bend. Leave enough straight tube, to
attach a hose clamp to each side.
2. Remove the inner rubber hose.
Side louver attached to body.
Fuel Neck and Gas Cap
136
www.factoryfive.com
508-291-3443
/
",
/
" drill bit,
1
3
8,
16
Advertisement
Table of Contents
