Factory Five Racing Mk3 Roadster Assembly Manual page 194

• The Cobra brakes do not clear most Halibrand style wheels.
• When using this setup, the '94 and newer rear axles have a hub-to-hub distance of 61.125"
compared to the '93 and older rear axles that had a hub-to-hub distance of 59.25". Wheel
offsets would need to be changed accordingly.
IRS Setup's
• Using the FFR Independent Rear Suspension with 89-97 Thunderbird Super Coupe
rear disc brakes with the Cobra front brakes use the
IRS, the rear discs are 5-lug, so vehicles need to have the front rotors converted to 5-
lug to match. This five lug front conversion can be purchased from Ford Motorsport
(Part # M-1102-C), or rotors from a '91 Lincoln Mark VII can be used. In both front
conversions, the rotors bolt right on to the 87-93 front spindle, and use the 87-93
Mustang caliper.
• If using Super Coupe rear calipers and Mustang front calipers use a
cylinder. The Super Coupe caliper looks almost identical to the Turbo Coupe caliper.
The Super Coupe caliper has a 1.6875" piston and uses a different e-brake cable
attachment.
4 or 5 lug
12"Front - Baer Racing Baer Claw System E7FM-10119- (4 or 5) DN
Kit includes spindles,
aluminum hubs that are separate from the rotor, 2 piston PBR calipers, stainless steel
braided flexible brake lines, and pads. This kit can be purchased in 4 or 5 lug
versions.
This setup will clear 17" Halibrand bolt on wheels where as Mustang Cobra brakes will not.
11.35"Rear - Bear Racing Baer Claw System F3FM-10610- (4 or 5) BN
Kit includes 11.35" - 0.81" thick rotors, single piston PBR calipers, caliper
brackets, e-brake cables, flexible stainless steel braided brake lines, and pads.
This kit can be purchased in 4 or 5 lug versions.
13"Front - Bear Racing Baer Claw System E7FM-10159- (4 or 5) HN
Kit includes spindles,
aluminum hubs that are separate from the rotor, 2 piston PBR calipers, stainless
steel braided flexible brake lines, and pads. This kit can be purchased in 4 or 5 lug
versions.
12"Rear - Bear Racing Baer Claw System F3FM-10600- (4 or 5) DN
Kit includes 12" - 0.81" thick rotors, single piston PBR calipers, caliper brackets,
e-brake cables, flexible stainless steel braided brake lines, and pads. This kit can
be purchased in 4 or 5 lug versions.
1984 Jeep Cherokee Manual Brakes
15 / " master cylinder, 12" diameter - 0.81" thick rotors,
16
Go a step further
15 / " master cylinder, 13" diameter - 1.10" thick rotors,
16
This setup does not clear Halibrand wheels.
194
www.factoryfive.com
/ " master cylinder (All steel)
15
16
15 / " master cylinder. With the
16
OR
508-291-3443
/ " master
15
16