Factory Five Racing Mk3 Roadster Assembly Manual page 53

3. Insert the steering rack bolts through the frame mount, rack and rear frame mount and lock nut. Use
the provided washers on the driver side (slotted) only.
4. Tighten the bolts to the bolt torque spec.
Note: The inner Tie Rod Extensions are for stock Power Steering Racks only, not for manual steering
racks.
5. Pull back the rubber boot on the inner tie rod and remove the inner tie rod from the steering rack.
6. Put a dot of thread lock on the threads of the steering rack and attach the steering rack extension to
the steering rack using a 1.50" wrench.
Steering rack mounted to frame
53
www.factoryfive.com 508-291-3443
.