Factory Five Racing Mk3 Roadster Assembly Manual page 153

2. Mount the straight pipes to the Mustang headers. The passenger straight pipe is shorter. Aftermarket
headers may require "ovaling" the holes on the two-bolt flange.
3. Leave the bolts hand tight in order to locate the side pipes properly.
4. Attach the side exhaust mount to the side pipe using the
below.
5. The side exhaust are positioned with the rear mount on the bottom of the pipe facing the body.
6. Mount the side exhaust to the four bolt flange on the straight pipes using the kit fasteners and gasket.
Leave the bolts slightly loose to allow adjustment.
7. With the help of someone or using a couple of jack stands, line the side pipe up with the side of the
body.
Exhaust mount cut in half.
Side exhaust hanger installed
153
www.factoryfive.com 508-291-3443
/ " button head bolts and locknuts as shown
5
16
.