Factory Five Racing Mk3 Roadster Assembly Manual page 182

6. On a piece of masking tape, draw one horizontal line on the wall at a height exactly 2 inches lower
than Measurement A.
7. On the line, make vertical marks both to the right and left of the vehicle centerline mark at the
distance of Measurement B from the vehicle centerline vertical line.
8. Turn the headlights on and adjust the vertical aim of the headlights so that the top horizontal cutoff of
each of the beams is located along the horizontal line drawn on the wall.
9. Adjust the horizontal aim of the low beam headlights so that the point at which the top cutoff of the
beam begins to slope upwards is located at the vertical marks.
182
www.factoryfive.com 508-291-3443