Fuel Filter - Factory Five Racing Mk3 Roadster Assembly Manual

3. Put a floor jack underneath the center of the gas tank with a friend holding one end of the gas tank for
balance.
4. Raise the tank and hold it up to the ¾" vertical tubes while you get the straps positioned.
5. The straps install first at the rear of the frame with the 2" bolts provided. Swing the straps under the
tank and bolt them to the front posts. Use kit fasteners provided.
ATTENTION: Make sure to install the fuel filter in the correct flow direction. Determine whether or not
a new filter is needed. It's a good general rule to replace the filter no matter what.
1. Attach the stock Mustang high-pressure (large diameter) hose to the fuel tank and to the in side of the
fuel filter in its bracket.
2. Mount the bracket and filter on the inside of the passenger side 2"x 3" rear trunk frame extension.
Tank strap attached to frame
Side view. The Mustang fuel tank installed into the rear frame.

Fuel Filter

www.factoryfive.com
60
508-291-3443