Factory Five Racing Mk3 Roadster Assembly Manual page 276

Wiring harness
With all FFR EFI kits, the donor car wiring harnesses are required. The 87-93 harness has 5 sections:
engine, rear, front, dash, and transmission. For a carbureted car, a wiring harness for the entire vehicle
can be purchased through Factory Five, FFR# 12411.
Accelerator Pedal
The accelerator pedals remained unchanged from 1979 to 2004, and they all work with FFR kits.
Gauge Cluster
All FFR Roadster kits can use a modified version of the 1987-2004 donor car gauges.
Pedal Box (clutch and brake pedals)
Pedal boxes are the same from 1982 to 1993. In 1994 the box switched to a new design. This newer
pedal box needs four tack welds to be drilled out, and a notch to be made in the clutch pedal stop to allow
use in an FFR kit. The notch is required for clearance of the gas pedal.
F400/R165
1994
F500/R265
1995
F400/R165
F500/R265
F400/R165
1996-98
F500/R265
1999 F450/R210
2000 F450/R210
2001-02 F450/R210
2003 F450/R210
2004 F450/R210
*Convertibl
e F500/R470
276
www.factoryfive.com
0 0
F400/R16
0
F700/R20
0
F400/R16 F850/R26
0 0
F400/R16
0
F500/R47
0
F800/R75
0
F500/R470*
F600/R600*
508-291-3443