Yamaha RX10LTGTYL Service Manual page 1599

Parts be tightened Parts be tightened
Wheel bracket shaft and sliding frame
Set bolt (front axle)
Speed sensor
Gear unit (speed sensor)
NOTE:
Tightening steps:
1. Tighten the bolt to a torque at 155 Nm (15.5 mSkg, 112 ftSlb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 mSkg, 43 ftSlb).
TIGHTENING TORQUE
Tightening torque
Nm mSkg ftSlb
72 7.2 52
9 0.9 6.5
20 2.0 14
40 4.0 29
9-20
SPEC
Remarks Remarks

Apply LOCTITE