Table of Contents
Advertisement
13. Note in the retrieved data that only 5 associations are shown as "down".
Note
A comparison of the scp assoc "up" and "down" logs indicate that the "leonardo" modality continued
to add associations without closing down associations until apparently the limit of 12 associations
was reached. This prevented new associations from occurring.
7-10-2-4. Contents of the Log
Each line of the log documents an "event". Each event is divided into 16 columns of information. Only 4 or
5 of these columns are useful to the FE. (These are in bold in the list below.) The others contain data that
is useful only to software design. To decrease the size of the log for viewing, these columns should be
removed from the viewed log by means of the Options function described in the preceding paragraph.
The columns, from left to right, include:
1. Event Type -- This column provides the same information as the Level column. It indicates the level of
log detail provided for the event. The levels from most detailed to lowest are: TRACE (Level 6),
DEBUG (5), DIAG (4), INFO (3), WARNING (2), ERROR (1), and FATAL ERROR (0). Refer to
paragraph 7-10-2-5.
2. Time-- Provides the time of the event, down to 1/100th of a second. The time is useful mainly for
locating events in the log.
3. Code -- Code for a particular event. Normally an error code.
4. Text-- This column describes the event.
5. App-- The software application in which the event occurred. There are 3 applications: MIM, DV8150,
and WebLink.
Note
The MIM application includes all software in the DRE that is common to other MIM systems. The
DV8150 application includes the software that is specific to the MCS, but also DRE software such as
the MCS Interface Server which was created specifically for the 8150 IMAGER and is not used in
other MIM systems. The WebLink application is the service platform software.
2005 July Rev. B
7F3318
Section 7 - - Troubleshooting
7-79
Advertisement
Table of Contents
Troubleshooting
