Cleaning The Optics Module - Kodak DryView 8150 Service Manual

Service Manual
5-5.

Cleaning the OPTICS MODULE

Note
This procedure is not part of preventive maintenance. Do this procedure only if customer complaints
about image quality indicate that dust is lodged on flexible LENS L3 in the OPTICS MODULE.
Service Engineering recommends that you have a replacement OPTICS MODULE available when
you respond to an optics--related service call. If cleaning does not eliminate the problem, you will
have to replace the OPTICS MODULE.
Symptom: Light density streak across the 14-inch dimension of the FILM. Use the Optics Troubleshooting
Training Guide, in the CHEMICAL CLEANING KIT, to help determine corrective actions.
Required Tools:
CHEMICAL CLEANING KIT (SP7F6028).
•
This kit includes:
The CHEMICAL CLEANING KIT includes:
BOTTLE
•
SWABS
•
A CD containing:
•
-- Training Video (.mpeg file)
-- Video Transcript (.doc file)
-- Troubleshooting Guide
Locally Obtained Supplies:
Non--powdered latex GLOVES
•
METHANOL (preferred) or ISOPROPYL ALCOHOL
•
These solvents are not included in the kit and must be obtained locally. Follow the safety regulations
in your region when carrying and using these chemicals.
Procedure:
1. Study the video on the CD. The video is in MPEG format. If you cannot view the video, read the
transcript of the video that is also on the CD. You can view the transcript with a word processor such
as Microsoft Word.
2. Perform the cleaning procedure as described in the video.
3. If chemical cleaning does not solve the problem, replace the OPTICS MODULE.
5-20
7F3318 2005 July Rev. B