Table of Contents
Advertisement
b. Click [Modify].
c. In the "Cache Enabled" window, select YES.
d. In the "Input Cache Location" window, type the file location on the DRE HARD DISK (C:/temp) for
storage of the raw image.
e. In the "Rendered Cache Location" window, type the file location on the DRE HARD DISK
(C:/winnt/temp) for storage of the rendered image.
f. In the "Max. Number of Images" window, type the maximum number of images you wish to view
(minimum value is 10, maximum value is 100).
g. In the "Max. Cache Size (MB)" window, type a size in megabytes for the storage area on DISK
(minimum value is 100 MB, maximum is 200 MB, default is 500 MB).
h. Click [Save].
Note
The "Image Cache" area on the DRE HARD DISK is now set up for storage of images sent down
from the MODALITY. The storage area will remain enabled for 2 hours, and will capture all images
received into the DRE The "raw" image is the DICOM image received into the PACSLink from the
network. The "rendered" image is captured after rendering in the PACSLink Delivery Interface.
2. To view the images in the Image Cache:
a. On the main menu of the SERVICE TOOL, select Monitoring>Image Viewer.
2005 July Rev. B
7F3318
Section 7 - - Troubleshooting
7-27
Advertisement
Table of Contents
Troubleshooting
