Film Pickup Cups - Kodak DryView 8150 Service Manual

Service Manual
4-6-2.

FILM PICKUP CUPS

1. Remove the SUPPLY CARTRIDGE.
!
Warning
When the POWER CORD is plugged in, hazardous voltages are present in some areas of the
IMAGER. These voltages can cause severe injury or death.
2. Remove power and disconnect the POWER CORD.
3. Remove each FILM PICKUP CUP as follows:
a. Insert a small flat-blade screwdriver into the SLOT at the center of each CUP and turn
counterclockwise to remove the CUP and HUB (Figure 4-17).
b. Use the FLAT BLADE SCREWDRIVER to pry the HUB from the CUP.
4. When reassembling the CUPS, do not overtighten the HUBS.
4-20
Vacuum
Hose
Figure 4-17. Replacing the PICKUP CUPS
Hub
Cup
8100- - 75L
7F3318 2005 July Rev. B