Table of Contents
Advertisement
8-5-34. Error 21-119: Pickup Did Not Contact Film
LOCAL PANEL Message
Internal Hardware Failure: Film
Pickup (Alarm sounds)
Summary
The FILM SURFACE SENSOR did not change from unblocked to blocked after the pickup arm left the
home position.
Result of Error
The IMAGER is unable to pick up film and print. Otherwise it can operate as normal (acquiring, queueing
prints, completing processing, etc.).
User Action
1. Restart the IMAGER.
2. If the error persists, call Service.
FE Action
2005 July Rev. B
7F3318
Log Message
Film Surface Sensor (S4) failed to
confirm that pickup arm assy
lowered and contacted film
Section 8 - - QuickSheets
DICOM Message
Severity
FILM TRANSP
1-Alert
ERROR
8-37
Advertisement
Table of Contents
Troubleshooting
