Configuring The Local Panel - Kodak DryView 8150 Service Manual

Service Manual
2-6-8.

Configuring the LOCAL PANEL

1. From the main menu of the SERVICE TOOL, select Configuration>MCS>LP.
2. Check the "Display language" window.
3. If you need to change the language that will be used on the LOCAL PANEL:
a. Click [Modify].
b. Select the desired language from the "Language" dropdown menu.
c. Click [Save].
Note
"Key Access Timeout" is the number of seconds that passcode-protected screens on the LOCAL
PANEL will remain on before automatically closing and returning to the "Status" screen. The timeout
can be set from 30 to 300 seconds.
4. If you wish to change the default timeout value:
a. Click [Modify].
b. Select the desired timeout value.
2-36
7F3318 2005 July Rev. B